NDT Inspection

NDT INSPECTION

INDUCTOSENSE

Our battery-free, wireless sensing technology can be applied across a range of industries where corrosion or erosion of pipework or vessels needs to be monitored. safe sensor can be applied to thickness measurement location (TMLs) on an asset providing repeatable and RFID tagged ultrasonic thickness measurement. The data can be acquired by anybody and without the human error associated with manual ultrasonic.

Once the WAND sensors have been installed, they can be activated by bringing the probe close by without the need for accurate alignment or coupling gels. The probe can be mounted on an extendable pole to take measurements quickly which alleviates the need for scaffolding, rope access or ladders. The WAND sensors can be installed on large flat surfaces (eg side of a pressure vessel), or in difficult to reach spaces. For wet or humid environments, they can be fully protected using the coating provided.

SMARTPIMS

Sensor Networks smartPIMS Modbus non-intrusive ultrasonic corrosion/erosion monitoring system connects directly to a PC or laptop to take isolated measurements, or integrates with your SCADA/DCS system for polling at any user-defined time interval. Data can be readily transmitted to webPIMS, a cloud based back-end for analysis and trending, or simply exported to XML or CSV as necessary for reporting purposes :

  • a. Up to 32 units connect on multi-drop network extending as far as 1000’ (305m).
  • b. Offers 16 single- or 8 dual-element UT probe channels.
  • c. Transducers available to withstand -22°F (-30°C) to 932°F (500°C).
  • d. Maintains 1 mil (0.001” / 0.025mm) precision and 0.040” (1mm) minimum wall thickness.
  • e. Sensors install buried or above-ground, temporarily or permanently.
  • OPEN VISION

    OPENVISION™ is a light weight live video X-ray imaging system specifically designed for hand-held inspection. It includes a highly sensitive radiographic imager and battery-operated 70kV x-ray tube designed for portable field operation. The proprietary intensified video imaging system captures images and displays them on a hand held LCD viewer, head mounted display, or portable recorder with LCD display in real-time.

    This portable system is commonly used for Corrosion Under Insulation inspection. Corrosion Under Insulation (CUI) inspection is a term used to address the inspection of areas that exist between the insulation material and the exterior wall of the pipe. Stripping down the insulation and searching for problem spots is a costly and time-consuming process. The OpenVision X-ray system allows you to inspect lengths of pipe work, bends and joints in a matter of minutes, pinpointing any defects without removing the insulation.

    • All
    • INDUCTOSENSE
    • SMARTPIMS
    • OPEN VISION
    img

    Inductosense

    Wireless and NON Destructive(WAND)
    img

    Inductosense

    Wireless and NON Destructive(WAND)
    img

    Inductosense

    img

    Inductosense

    img

    Inductosense

    img

    SmartPIMS

    img

    SmartPIMS

    img

    SmartPIMS

    img

    SmartPIMS

    img

    Open Vision

    img

    Open Vision

    img

    Open Vision

    img

    Open Vision

    img

    Open Vision

    img

    Open Vision

    img

    Open Vision